#Epoxy wood slab crack repair how to

To fill cracks with polyurethane, fill up cracks in wood by just adding few drops into the cracks, which will harden into a resin after it cures. After cutting, you can sand and recreate another smaller table. If the split is much and beyond repair such that the split extends throughout the wood, it is advisable to cut it over and improvise it for something else. For cases where the split is way too large to handle, you might have to cut the table down and transform it into something different. Then for something more serious like a tear, these following steps will guide you on fixing the damage. If you notice the split is a result of the slight movement of the wood, you can quickly correct this by using a patch. You need to take note of the depth and location of the clefts as well as the cracks.

#Epoxy wood slab crack repair how to

Not to worry, these following steps will guide you on how to repair your table-top and have it good as new.įirst off, before doing anything, you have to check and examine the extent of the damage caused by the split, which will help you know the exact method to apply when coming to the error in your table-top. No one wants their precious table to go wrong. Seeing splits on your table might not be attractive enough. After drying, you can use a permanent marker to add color to the wood then you can decide to sand and paint the wood. Apply and fill up the crack.Īfter applying epoxy, allow it to dry for at least a day, although epoxy dries very fast. All you have to do is stir, and you’re good to go.

To activate your epoxy, you’ll have to mix them as directed by the manufacturer and ensure you mix them efficiently to fill the whole crack. You can add a bit of color so that the epoxy will match that of the wood. When using epoxy, you’ll need to mix it in two forms, resin and hardener. In the case of extended cracks, epoxy is the most suitable as it forms a strong bond with the wood and fills the crack. Wood epoxy works best with impenetrable areas compared to wood fillers because they’re very light and thin and can penetrate the impervious areas and thin cracks. To prevent getting your fingers or body sticky all over, you can wear long-sleeved clothes as well as gloves. More so, it would help if you got safety goggles as they’ll protect your eyes from chemicals spilling into your eyes that might damage your lens. You must get yourself a standard respirator to guard your lungs against the fumes because wood epoxies are poisonous and pungent, most especially if you’re going to be working indoors. Working with these chemicals might be hazardous if you don’t protect yourself, which is why you must protect yourself while working with these chemicals as they’re composed of chemicals. If you notice the crack extends to the other side, you might have to cover the wood with masking tape to cover the wood underneath to prevent the epoxy from leaking out from underneath. That will help you to know the extent of the crack.

It is necessary to remove any form of trash, including dust because it will get in the way of the cracks that need to be filled, which will make it hard for the epoxy to bond to the bond.Ĭlean the debris no matter how small it might be. It is essential you clean your wood by washing it off with water and a bit of mild detergent, scrub it down, wash through with water and finally allow it to dry totally.Īfter ensuring the wood is dry, the next thing is to eliminate any form of trash. I’m sure you’re wondering if that is necessary. Before you decide to apply your epoxy, you’ll have to prepare your wood by cleaning it.